news

news

The usage cycle of physiotherapy electrodes

  The electrode is attached to the corresponding treatment site of the human body, so that the positive and negative poles of the therapeutic instrument are connected, and the pulse wave generated by the therapeutic instrument is passed through the self-adhesive electrode to simulate acupuncture and massage therapy like countless electric needles. Self-adhesive electrode sheet can meet the needs of various body surface (acupoint) electrical stimulation therapy. It is fast and convenient to use, thin and soft texture, close adhesion, reliable bonding, uniform conduction, comfortable and safe treatment, no stinging, no burn, properly stored, can be used repeatedly.

How to use: 

1. Tear the protective film on the adhesive before use.

2. Attach the self-adhesive electrode to the part that needs physiotherapy or the corresponding point and press tightly.

3. After physiotherapy, separate the electrode from the wire and cover with a protective diaphragm.

4. When the adhesive force is insufficient, the surface can be cleaned with clean water. After the dirt is removed, part of the adhesive force can be restored.

5, self-adhesive electrode is consumable parts, please take good care of use, storage temperature is 10℃-40℃, avoid direct sunlight.

6. The use of electrodes should first clean the skin and remove the grease and sweat stains on the skin surface, which can make the physiotherapy effect better and prolong the use of electrodes.

Physical therapy electrode according to its role and effect is not the same, the replacement time is different.

The length of time the physical therapy electrodes are placed in the body depends on the pre-existing condition. Electrocardiogram monitoring electrode placement time is too long, will lead to local allergy, itching performance. 

Suggestions: If it needs to be placed for a long time and itching is obvious, some local treatment can be done on the skin to reduce itching symptoms

Physical therapy electrode patch paste and replacement of disposable electrode patch method:

(1) Skin treatment method: Clean and treat the local skin on the chest, remove grease and stain with 75% alcohol, and shave the chest hair on the electrode site if necessary.

(2) Method of attaching disposable electrodes: Select the H92SG disposable electrode produced by Kehui Company, connect it to the Japanese photoelectric monitor, paste it firmly, and the position is required to be accurate to prevent the electrode from falling off.

3)Precautions for replacing disposable electrodes: The electrodes should completely avoid the precardiac area and muscular parts of the chest wall. Should be in close contact with the skin, sweating timely replacement, regularly change the position of the sticking electrode, to prevent skin damage.

More details please check Quanding medical site:  https://www.quandingmedical.com/eelectrode-pads/


Post time: Feb-27-2023